Enables a scalable data acquisition system
Up to 10 I/O modules can be linked to a single data acquisition module (GM10)
For the desktop, DIN rails, or wall-mounting. No special attachments required.
Select modules according to your application. Noise-resistant, magnetic relay types also available. All modules have removable terminal blocks for easy wiring. The same modules used in the SMARTDAC+ series.
|GX90XA-10-U2||Analog input module||DC voltage, DC current (with external shunt resistor connected), thermocouple, RTD, contact (solid state relay scanner type)||10|
|GX90XA-10-L1||DC voltage, DC current (with external shunt resistor connected), thermocouple, contact (Low withstand voltage solid state relay scanner type)||10|
|GX90XA-10-T1||DC voltage, DC current (with external shunt resistor connected), thermocouple, contact (electromagnetic relay scanner type)||10|
|GX90XA-10-C1||DC current (mA) (solid state relay scanner type)||10|
|GX90XA-04-H0||DC voltage, DC current (with external shunt resistor connected), thermocouple, RTD, contact (individual A/D type)||4|
|GX90XA-06-R1||4-wire RTD, 4-wire resistance(solid state relay scanner type)||6|
|GX90YA||Analog output module||Current output (isolated between channels)||4|
|GX90XD||Digital input module||Remote control input or operation recording||16|
|GX90YD||Digital output module||Alarm output||6|
|GX90WD||Digital input/output module||Remote control input or operation recording/alarm output||DI:8/DO:6|
|GX90XP||Pulse input module||Pulse signal data acquisition, integral count||10|
|GX90UT||PID control module||PID control (2 loop)||AI:2/AO:2
|Type||Channels||Scan interval (shortest)||Scanner||TC||RTD||DCV||DI||mA||Resistance||Feature|
|Low withstand voltage relay (-L1)||10||500ms||SSR||√||√||√||Mid-price|
|Electromagnetic relay (-T1)||10||1s||Relay||√||√||√||Noise-resistance|
|DC current input (-C1)||10||100ms||SSR||√||mA only|
|High speed universal (-H0)||4||1ms||—||√||√||√||√||High speed measurement|
|4-wire RTD (-R1)||6||100ms||SSR||√||√||4-wireRTD|
|Type||Internal memory||Max. input/output channels*|
|GM10-1||500MB||Single-unit configuration||0 to 100|
|Multi-unit configuration||0 to 100|
|GM10-2||1.2GB||Single-unit configuration||0 to 100|
|Multi-unit configuration||0 to 420|
* When analog input only
|Input type||Measuring accuracy*1 (typical value*2)|
|DCV||20 mV||±(0.01% of reading +5 μV)|
|60 mV||±(0.01 % of reading +5 μV)|
|6 V(1-5 V)||±(0.01 % of reading +2 mV)|
|K||±(0.01 % of reading +0.2 °C) However, -200.0 to 0.0 °C ：±(0.15 % of reading +0.2 °C)|
|K (-200 to 500 °C)||±0.2 °C However, -200.0 to 0.0 °C: ±(0.15 % of reading +0.2 °C)|
|J||±0.2 °C However, -200.0 to 0.0 °C: ±(0.10 % of reading +0.2 °C)|
|T||±0.2 °C However, -200.0 to 0.0 °C: ±(0.10 % of reading +0.2 °C)|
|N||±(0.01 % of reading +0.2 °C) However, -200.0 to 0.0°C: ±(0.22 % of reading +0.2 °C)|
|RTD||Pt100||±(0.02 % of reading +0.2 °C)|
|Pt100 (high resolution)||±(0.02 % of reading +0.16 °C)|
Expand up to 420 ch by using the GX90EX expansion module. (GM10-2)
On the GM10-2 large capacity type, up to 1000 ch are available for recording when including MATH and communication channels. Connect units with LAN cables for dispersed installations.
You connect directly with a LAN cable without connecting through a hub or repeater.
* You can also connect a GX60 expansion unit.
When the data logger is installed offsite (away from the DUT), you can place the sub unit at the site and monitor data without the need for long-distance wiring of thermocouples and other sensors.
Provides a smooth, familiar user experience
Through a Web browser you can monitor the GM in real time and change settings. You can easily build a seamless, low-cost remote monitoring system with no additional software.
With the scroll bar, you can seamlessly scroll between past and current trends.
The setting screen lets you copy AI channel settings and other information to Excel for editing. You can reimport the data into the setting screen after editing.
Data files saved on the GM can be viewed and printed. You can perform statistical computation over an area and export to ASCII, Excel, or other formats.
Save settings or transfer them to the GM. Connections can also be made easily via USB or Bluetooth.
With operating temperatures of -20 °C to 60 °C, it supports a wide range of applications in varying installation environments.
You can enter settings or monitor from a tablet without ever bringing a PC to the site.
Bluetooth supports Android only.
Wi-Fi supports both Android and iOS.
Simple to use for in-veheicle testing.
Service staff can easily perform maintenance on the GM.
Offers a seamless data transfer environment
Yokogawa's proprietary A/D converter allows the high speed module to measure data points as fast 1ms.
* With 1ch per module. At 2 ms, 2 ch per module, and at 5 ms or more, all 4 ch per module.
Users have the ability to choose two different scan intervals on a single GM system. This allows users the flexibility to measure various types of inputs with two different scan intervals in a single system. For example, this provides for efficient, simultaneous measurement of signals with slow fluctuations such as temperature, and fast-changing signals such as pressure and vibration. Modules can be assigned to measurement groups.
Enables PID and program control
The web application enables remote operation and monitoring from a browser.
Supports various kinds of math computation, including basic math and functions (square root, logarithms, trigonometry). Write formulas using variables for measured or computed data and save or display the results—this saves time and effort on post-processing. Create hourly, daily, monthly, and other reports with the Report function.
Ability to assign actions tied to specific events during the operation of the data acquisition station.
Schedule management for periodically executing calibration correction configuration and the like. You can set the input correction factor as a sensor correction factor and instrument correction factor. TUS software is available for easily creating TUS (temperature uniformity survey) reports.*
* For details on TUS software, consult with your Yokogawa dealer.
Input calibration is performed in the AI channel setting screen, and the calibration period settings are entered in the schedule management setting screen.
Record pre-defined channel groups to separate data files with independent start and stop control. You can create up to 12 batches.
Provides a variety of convenient networking functions
GM supports Modbus TCP/IP client and server modes for Ethernet communications and Modbus RTU master and slave modes for optional serial communications.
Using the Modbus/TCP and Modbus/RTU functions, you can display and save data from the server and slave devices on the GM.*
* Requires the communication channel (/MC option).
(You can connect up to 16 Modbus/TCP servers, or up to 32 servers with the GM10-2.)
(You can connect up to 31 Modbus/RTU slaves.)
Using the Modbus/TCP and Modbus/RTU functions, you can acquire GM data from upstream devices.
GM supports EtherNet/IP server functions. You can access GM from PLCs or other devices and load measurement/MATH channels or write to communication input channels* (GM10-1: up to 300 ch, GM10-2: up to 500 ch).
* Requires the communication channel option (/MC option).
Protocol function that enables connection from a GM to Mitsubishi Electric PLCs without sequencer programs. The GM can run as the SLMP client to write to a GM measured data PLC, or PLC data to communication channels*.
* Requires the communication channel option (/MC option).
Acquire precise digital data on the GM by digital communication connectivity to a power measuring instrument (WT series power analyzers) and record it along with the GM's measured data. Since it records a device's power consumption, temperature, and other phenomena at the same time, the GM is ideal for performance evaluation testing.
Data acquired by the GM can be accessed through Ethernet communication from a host system (OPCUA client). Writing from upstream systems to GM communication channels requires the communication channel function (/MC option).
The GM supports DARWIN communication commands. Use your current DARWIN communication programs as-is on the GM. It's easy to switch from an existing DARWIN unit.
The FTP client/server functions allow you to easily share and manage data from a centralized file server
The GM can send a variety of informative e-mail messages that include alarm notification reports, periodic instantaneous data values, scheduled report data and other information.
GM uses SNTP protocol in client mode to acquire time information from a network time-server. This function allows any number of GM units within a facility to have precisely synchronized time; all units will record data with coordinated date and time stamp information. In addition, GM can function as a server, providing time data to other SNTP client units on the network.
Using Dynamic Host Configuration Protocol (DHCP), the GM can automatically acquire the settings it needs (IP address) for network communications from a DHCP server. This makes it easier than ever to install the unit on a plant network.
Rock-solid hardware and highly secure
Supports long-duration and multichannel recording. Measured data is always stored to internal memory, and data is transferred to external storage media at regular intervals. Redundancy can be achieved by sending data to a server with the FTP client function. Securely saves measured data even in the event of a sudden power loss.
|Number of recording channels||Total sample time|
|30||Approx. 71 days|
|100||Approx. 23 days|
|300||Approx. 7 days|
With an internal memory of 1.2 GB and recording interval of 1 sec.
For increased security, measured data can be saved in binary format. This format is very difficult to decipher or modify in traditional text editors or other programs. To enable easy and direct opening of the data in text editors or spreadsheet programs, choose text format. This allows you to work with your measurement data without dedicated software.
Safely sends and receives customer data.
SSL: An encryption protocol for data sent over TCP/IP networks.
With the advanced security function option, GM supports the USA FDA's Title 21 CFR Part 11 regulations (for the pharmaceutical manufacturing industry). It gives you access to a login function for requiring user names, IDs, and passwords, plus electronic signatures, audit trails, an anti-tampering function, an Active Directory-based password management function, and other security features.
You can use settings to lock the GM10 operation keys in order to avoid accidental start/stop of measurement or computation.
A proprietary A/D converter delivers high speed, high precision data acquisition. (High-speed AI, PID Control module)
Get a Quote